1. Surface preparation
- Wipe the glass or surface to be pasted with a damp cloth to remove dust, grease, and dirt.
- Wipe again with a dry cloth to ensure there is no moisture on the glass.
2. Determine the location of the pasting
- Try placing the label on the intended location to align it first.
- If there are multiple stickers, arrange the layout before officially pasting.
3. Spray a thin layer of water (if necessary)
- Use a water spray bottle to spray a thin layer of mist onto the glass.
- This makes it easier to move the label to adjust the position, and also reduces air bubbles.
4. Attach the label
- Peel the label off the backing (backing paper).
- Press the smooth side of the label against the glass, from top to bottom or from the middle to the sides.
- Use a plastic card, soft cloth, or scraper to rub from the inside out to remove all air bubbles.
5. Finishing
- Check the corners again, press the label firmly to ensure it adheres firmly by electrostatic force.
- Wipe off any remaining water around the label.
- After 1-2 hours, the label will be fixed and transparent.