🔥Chassis Rust Converter

Cover and protect metal surfaces from rust

Don’t worry! Our Chassis Rust Converter will help you solve the problem easily. It is the easiest-to-apply, fastest drying rust converter. It will dry within 10 minutes after brushing.

🔥Having rust problems on all kinds of metal surfaces?

It transforms existing rust into a black protective polymer barrier, which is weatherproof and can give metal objects a fresh coat of paint. And it will provide twice as much rust protection.

This rustproof treatment prevents future rust and corrosion by isolating moisture from rain and snow. No more worrying about metal objects exposed to rain or snow.

It transforms the existing rust into a black protective polymer barrier, which is weatherproof and can give metal objects a fresh coat of paint. And will provide more than twice as much rust protection.

🔥Convert Existing Rust

It revives and protects iron and metal surfaces on automobiles, dumpsters, equipment, railings, etc.

🔥PROTECTS IRON AND METAL SURFACES

This rust treatment prevents future corrosion by locking out moisture from rain and snow. Dries in 10 minutes.

🔥PREVENTS FUTURE CORROSION

It is a non-flammable, low VOC, water-based treatment. It is non-toxic and emits no harmful fumes.

🔥NON-TOXIC, FUME-LESS FORMULA

- Surface preparation: Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, dust, and grease.

- Application: Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 10 minutes drying time between coats.

- Clean-up: Application equipment should be cleaned immediately with soap and water.

- General: Do not apply this product if the surface temperatures are below 50°F. Store in a cool, dry place, protected from freezing or temperatures above 100°F. For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.